features low power lose;high efficiency low forward voltage drop low thermal resistance high current capability high speed switching high surge capacity high reliability mechanical data case: to-3p molded plastic epoxy: ul94v-0 rate flame retadant lead: mil-std-202e method 208c guaranteed mounting position :any weight:5.1grams polarity:as marked maximum ratings and electrical characteristics rating at 25 ambient temperature unless otherwise specified. single phase, half wave ,60hz, resistive or inductive load. for capacitive load, derate current by 20% her her her her her her her her 3001pt 3002pt 3003pt 3004pt 3005pt 3006pt 3007pt 3008pt maximum recurrent peak reverse voltage v rrm 50 100 200 300 400 600 800 1000 v maximum rms voltage v rms 35 70 140 210 280 420 560 700 v maximum dc blocking voltage v dc 50 100 200 300 400 600 800 1000 v maximum average forward rectified current @t a =75 peak forward surge current 8.3ms single half sine-wave super imposed on rated load(jedec method) typical thermal resistance r ja /w typical junction capacitance (note2) c j pf maximum peak forward voltage at 15.0a dc v f 1.7 v maximum dc reverse current @t j =25 at rated dc blocking voltage @t j =100 maximum reverse recovery time(note1) t rr ns operating and storage temperature range t j, t stg 3.the typical data above is for reference only( ?). rev. 7, 13-mar-2017 unit notes:1.measured with i f =0.5a,i r =1a,i rr =0.25a 2.measured at 1.0 mhz and applied reverse voltage of 4.0vdc. -55 to + 150 10 150 1.0 a 1.0 her3001pt thru her3008pt high efficiency glass passivated rectifiers i o a 30 reverse voltage - 50 to 1000 volts forward current - 30.0 amperes symbol dimensions in inches and (millimeters) characteristics a i r i fsm 300 70 1.3 125 2.4 to-3p .645(16.4) .610(15.5) .245(6.2) .820(5.7) .858(21.8) .803(20.4) .775(19.7) .807(20.5) .181(4.6) .140(3.5) .086(2.18) .076(1.93) .225(5.7) .205(5.2) .048(1.22) .044(1.12) .030(0.76) .020(0.51) .095(2.4) .085(2.1) .142(3.6) .126(3.2) .193(4.90) .203(5.16) .127(3.22) .117(2.97)
rating and charactertic curves her3001pt thru her3008pt the cruve graph is for reference only, can't be the basis for judgment( ?)! rev. 7, 13-mar-2017 instantaneous forward current,(a) instantaneous forward voltage, (v) fig.4-typical instantaeous forward characteristics 0.2 1.0 0.1 10 40 1.1 1.3 1.5 1.7 1.9 0.90.7 20 4 2 0.4 80 0.5 t j =25c pulse width 300us 1% duty cycle her3001pt - her3003pt her3004pt - her3005pt her3006pt - her3008p t a mbient temperature a verage forward current,(a) fig.1- typical forward current derating curve single phase half wave 60h z resistive or inductive load 36 150 30 12 6 0 24 100 50 0 peak forward surge current,(a) fig.3-maximum non-repetitve forward surge current number of cycles at 60h z 100 50 20 5 2 110 600 300 100 200 0 400 500 8.3 ms single half-sine-wave (jedec metod) t j =25c 300 150 50 100 200 250 5020 10.5 0.1 2510 100 1000 reverse voltage,(v) junction capacitance(pf) fig.5-typical junction capacitance instantaneous reverse current(ua) percent of rated peak reverse voltage(%) fig.2-typical reverse characteristics 1.0 10 0.1 40 60 80 100 120 140 20 1000 100 t j =100c t j =25c
legal disclaimer notice all specifications and data are subject to be changed without notice to improve reliability function or design or other reasons. hy makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the co- tinuing production of any product. to the maximum extent permitted by applicable law, hy disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,consequential or incidental d- amages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merch- antability. statements regarding the suitability of products for certain types of applications are based on hy?s knowledge of typical require- ments that are often placed on hy products in generic applications. such statements are not binding statements about the suitabi- lity of products for a particular application. it is the customer?s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application.parameters provided in datasheets and specific- ations may vary in different applications and performance may vary over time. all operating parameters, including typical paramet- ers, must be validated for each customer application by the customer?s technical experts. product specifications do not expand or otherwise modify hy?s terms and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, hy products are not designed for use in medical, life-saving, or life-sustaining applicati- ons or for any other applications in which the failure of the hy product could result in personal injury or death. customers using or selling hy products not expressly indicated for use in such applications do so at their own risk.please contact authorized hy pers- onnel to obtain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of hy. product names and markings noted herein may be trademarks of their respective owners. ?????????? hy ???????????hy (i) ? ??????(ii) ???????(iii) ??? ???????? ????? hy ? hy ???????????? ???????????????? ????? ????????????? ??? hy ???? hy ???? ?hy ????? hy ??????? ?????? hy ????????hy ?? ? ? hy ??????????????????? ??? rev. 2, 16-mar-2017 disclaimer
|
